GEOGRAPHY PAPER 2
GRADE 12
NATIONAL SENIOR CERTIFICATE EXAMINATIONS
MAY/JUNE 2021
RESOURCE MATERIAL
INSTRUCTIONS AND INFORMATION
ENGLISH - AFRIKAANS
Diggings - Uitgrawings
Onrus Mountain - Onrusberge
Golf Course - Gholfbaan
River - Rivier
Sewerage Works - Rioolwerke
Estate - Landgoed
Salt Pan - Soutpan
Nature Reserve - Natuurreservaat
GENERAL INFORMATION ON HERMANUS
Hermanus lies along Walker Bay on the south coast of the Western Cape. It is located about 115 km southeast of Cape Town and is connected to the Mother City by the R43 highway (or the coastal R44 scenic route) and the N2 freeway.
Hermanus has a Mediterranean climate with warm summers. It receives roughly 520 mm of rainfall per annum, the majority of which occurs during the winter months of June to August in the form of frontal precipitation. Summer and winter months are characterised by strong south-easterly and north-westerly winds respectively.
The town of Hermanus occupies a flat plain between the mountains and the sea. Subsequent lowering of the sea level led to the formation of the cliffs which dominate the coastline.
QUESTION 1: MULTIPLE-CHOICE QUESTIONS
The questions below are based on the 1 : 50 000 topographic map 3419AC HERMANUS as well as the orthophoto map 3419 AC 20 HERMANUS of a part of the mapped area. Various options are provided as possible answers to the following questions. Choose the answer and write only the letter (A–D) in the block next to each question.
1.1 Hermanus is situated in …
1.2 The main type of rainfall received in Hermanus during winter is …
1.3 The way in which height is indicated at 34°19ꞌ08ꞌꞌS 19°08ꞌ48ꞌꞌE on the topographic map is a …
1.4 The general direction of flow of the Leeurivier (river) in block C9 on the topographic map is in a … direction.
1.5 The distance from A to B on the line scale below is … metres.
1.6 The true bearing from the place of worship 1 to the school 2 on the orthophoto map is …
1.7 Man-made feature 3 on the orthophoto map is a …
1.8 The orchards and vineyards at M in block C10 on the topographic map are most likely frost resistant, because they are found in/on the …
1.9 The high-lying area at N in block D7 on the topographic map is a/an …
1.10 The main characteristic of the streams in block D8 on the topographic map:
1.11 The dominant stream pattern in block H8 on the topographic map is …
1.12 The main activity that causes an environmental injustice in block B5 on the topographic map is …
1.13 The main factor that influenced the dispersed pattern of the settlement at 4 on the orthophoto map is the …
1.14 The physical (natural) features responsible for the linear shape of the built-up areas in blocks J10, K9 and K10 on the topographic map is due to the ...
1.15 New Harbour at 5 on the orthophoto map is an example of a … economic activity.
[15]
QUESTION 2: MAP CALCULATIONS AND TECHNIQUES
2.1 Refer to the topographic map.
Calculate the magnetic declination for 2021. Show ALL calculations. Marks
will be awarded for calculations. Clearly indicate the direction in relation to
true north in the final answer.
Difference in years: ________________________________
Mean annual change: ________________________________
Total annual change: ________________________________
Mean magnetic declination for 2021: ________________________________ (5 x 1) (5)
2.2 Refer to the topographic map.
2.2.1 Calculate the average gradient from trigonometrical station 31 (O)
in block I4 to benchmark 36.4 (P) in block J5. Show ALL
calculations. Marks will be awarded for calculations.
Formula: Average gradient = vertical interval (VI)
horizontal equivalent (HE)
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
_____________________________________________________
(5 x 1) (5)
2.2.2
2.3 The block below consists of a vertical and horizontal scale, as well as the heights of the contour lines from 6 to 7 found on the orthophoto map.
Use the block below for ALL answers to QUESTION 2.3.1.
2.3.1
2.3.2 Calculate the vertical exaggeration of the cross-section drawn in
QUESTION 2.3.1(b). Show ALL calculations. Marks will be
awarded for calculations. Clearly indicate the unit of measurement
in the final answer.
Formula: Vertical exaggeration = vertical scale (VS)
horizontal scale (HS)
_______________________________________________
_______________________________________________
_______________________________________________
_______________________________________________
(4 x 1) (4)
[20]
QUESTION 3: APPLICATION AND INTERPRETATION
3.1 Refer to the topographic map.
3.1.1 Does the mapped area generally receive seasonal or annual rainfall?
Answer: ______________________________________________
(1 x 1) (1)
3.1.2 Give TWO pieces of evidence from the topographic map to support the answer to QUESTION 3.1.1.
_____________________________________________________
_____________________________________________________
(2 x 1) (2)
3.2 Refer to the topographic map.
Hermanus is located between the ocean and a high-lying area (mountain). A southerly wind blows during the day.
3.2.1 Is the southerly wind offshore or onshore?
Answer: ______________________________________________
(1 x 1) (1)
3.2.2 Explain your answer to QUESTION 3.2.1.
_____________________________________________________
_____________________________________________________
(1 x 2) (2)
3.3 Refer to the Botrivier (river) from block C6 to block D4 on the topographic map.
3.3.1 In which stage (course) of development is the Botrivier (river)?
_____________________________________________________
(1 x 1) (1)
3.3.2 Give ONE piece of evidence from the topographic map to support your answer to QUESTION 3.3.1.
_____________________________________________________
_____________________________________________________
_____________________________________________________
(1 x 2) (2)
3.3.3 How did the geomorphological process in this stage (course) of the river influence the crop farming in the area?
_____________________________________________________
_____________________________________________________
(2 x 2) (4)
3.4 Refer to the land-use zone between Hawston and Fisherhaven in blocks H3 and H4 on the topographic map.
3.4.1 Identify the land-use zone between Hawston and Fisherhaven in blocks H3 and H4 on the topographic map.
_____________________________________________________
(1 x 1) (1)
3.4.2 Give ONE piece of map evidence to support your answer to QUESTION 3.4.1.
______________________________________________________
______________________________________________________
(1 x 2) (2)
3.5 Refer to 9 on the orthophoto map.
3.5.1
Identify the street plan (pattern) at 9.
_____________________________________________________
(1 x 1) (1)
3.5.2 State ONE advantage of the street plan (pattern) at 9.
_____________________________________________________
_____________________________________________________
(1 x 1) (1)
3.5.3 How did the street plan (pattern) at 9 develop?
_____________________________________________________
_____________________________________________________
(1 x 2) (2)
3.6 Refer to 10 on the orthophoto map, which is an industrial area.
3.6.1 Are the industries heavy or light industries?
Answer: ______________________________________________
(1 x 1) (1)
3.6.2 Discuss why the industries identified in QUESTION 3.6.1 are in a suitable location.
______________________________________________________
______________________________________________________
______________________________________________________
______________________________________________________
(2 x 2) (4)
[25]
QUESTION 4: GEOGRAPHICAL INFORMATION SYSTEMS (GIS)
4.1 The following information on the Klei Dam at Q (block G8) on the topographic map is provided:
Location: 34°21ꞌ45ꞌꞌS 19°12ꞌ45ꞌꞌE
Depth: 10 m
4.1.1 Is the Klei Dam at Q in block G8 a point, line or polygon feature?
Answer: ______________________________________________
(1 x 1) (1)
4.1.2 State whether the following are spatial data or attribute data:
4.1.3 Explain the importance of determining the depth of the Klei Dam at Q for farming activities in the area.
_____________________________________________________
_____________________________________________________
(1 x 2) (2)
4.2 Refer to the enlarged insert of block F4 from the topographic map, showing a combination of different data layers.
4.2.1 What is a data layer?
______________________________________________________
(1 x 1) (1)
4.2.2 Use the topographic map and identify the data layer that has been omitted (left out) from the insert.
______________________________________________________
(1 x 1) (1)
4.2.3 What is the importance of the data layer identified in QUESTION 4.2.2 to the economic development of the farming community in block F4?
______________________________________________________
______________________________________________________
(2 x 2) (4)
4.3 Refer to blocks D4 and D5 on the topographic map. The quality of water in the identified blocks could be affected by human activities. How would a GIS specialist use data querying to evaluate the quality of water in this area?
______________________________________________________________
______________________________________________________________
______________________________________________________________
______________________________________________________________
(2 x 2) (4)
[15]
TOTAL: 75